STEM Robotics Systems 301
Combine mechanisms, board modes and sensors to explore how robots respond to their surroundings.
Try 2 free preview lessons. No account or registration required.
About this course & what you need
What you will learn
- Board modes
- Mechanical advantage
- Walking and vehicle systems
- Sensor reactions
Who this course is for
Experience with building, sensors and basic control
Equipment
Matching 301 mainboard and robot kit; check the lesson-specific connection and software requirements.
Device & connection
Use a modern browser. Check the requirements of the selected activity.
301 Connections · Inputs, Outputs & Remote Channel
Connect the signal path
Keep power OFF while connecting. Follow the model-specific original picture and the labels on the matching board.
- Input: connect the receiver or sensor to its specified source socket.
- Output: connect each motor to its dedicated M-L or M-R socket. Connect a speaker only where the guide specifies one.
- Energy: connect the battery to POWER.
Original L / C / R, IN1 / IN3 and speaker labels do not justify guessing the socket number on another board version. Confirm the matching layout before power-on.
For remote activities, match the receiver and remote channel ID using the original guide. Then select the required mode and press START.
Lesson Completion
Free preview: course progress is saved only with valid course access.
The free previews above do not require an account.